Minneapolis energy benchmarking requires owners of commercial and multifamily buildings of 50,000 square feet or more to report a full year of energy and water use to the City through ENERGY STAR Portfolio Manager by June 1 every year. The next deadline is June 1, 2027, for calendar-year 2026 data. Some low-performing buildings must also complete an energy evaluation, and large rental buildings have to point renters to their public energy results. This guide covers who is covered, what to submit, the fines, and how the City program fits with Minnesota’s statewide law.
Quick summary
- Covered buildings: commercial and multifamily residential properties of 50,000 sq ft or more that appear on the City’s “must comply” lists.
- What to report: a full calendar year of whole-building energy and water data, sent to the City through ENERGY STAR Portfolio Manager.
- Deadline: June 1 every year for the prior calendar year. The next one is June 1, 2027 (2026 data).
- Fines: $200 for a missed deadline, doubling each time it is reissued, up to four times. Unpaid fines are added to the property tax bill.
- Low-performing buildings may have to complete an energy evaluation, which the City says is free and good for five years.
- Buildings that benchmark with Minneapolis do not also have to report to the State of Minnesota’s large building program.
What is the Minneapolis energy benchmarking program?
Minneapolis started requiring large commercial and City-owned buildings to benchmark and report their energy use in 2013. The requirement sits in Section 47.190 of the Minneapolis Code of Ordinances and is run by the Minneapolis Health Department. In 2019 the City Council expanded the rules to add large multifamily buildings, energy evaluations for low-performing buildings, and time-of-rent energy disclosure.
The City publishes results on a public dashboard so tenants, buyers and lenders can compare buildings. The City of Minneapolis energy benchmarking page was last updated on August 7, 2026. It still lists the same June 1 deadline and $200 fine, and we found no new City requirements announced for 2025 or 2026.
Which buildings must benchmark?
The City’s must comply page names two groups of private buildings:
- Commercial buildings of at least 50,000 square feet.
- Multifamily residential buildings of at least 50,000 square feet.
The City keeps separate “must comply” lists for commercial and multifamily properties. If your building is on a list, you must submit data by June 1. The City supplies a Minneapolis Building ID and Property ID, and you enter them in Portfolio Manager. The list pages show a last update of December 2022, so if you think a building is listed by mistake, or should be listed and is not, contact the Energy Benchmarking team at mplsenergystar@minneapolismn.gov before the deadline.
The City’s compliance standards allow exemptions for properties in qualifying financial distress, properties less than 50% occupied during the year, and properties without a certificate of occupancy for all 12 months. Use the City’s online form to request an exemption or extension. You may apply for up to two extensions each year, with supporting documents such as a rental report showing low occupancy or an email showing you are still waiting on utility data.
Minneapolis energy benchmarking deadlines and key dates
| Item | Requirement or date |
|---|---|
| Covered buildings | Commercial and multifamily properties of 50,000 sq ft or more on the City’s must comply lists |
| Annual benchmarking report | June 1 every year, covering the prior calendar year |
| Next deadline | June 1, 2027 (calendar-year 2026 data) |
| Extensions | Up to two per year, with supporting documents |
| First fine | $200, then two weeks to submit or request an extension and pay |
| Repeat fines | Double each time ($400, $800, $1,600), up to four times |
| Energy evaluation | Required for low-performing buildings; valid for five years |
| Rental disclosure (large buildings) | At or before the time of rental application |
What you need to submit
Minneapolis uses EPA’s ENERGY STAR Portfolio Manager as its reporting tool. The City sends a data request through Portfolio Manager, and you respond to it with your building’s property record. The report must include a full calendar year (January 1 to December 31) of meter data for electricity, heating fuel and water. The City’s how-to guide points owners to automatic data transfer from Xcel Energy and CenterPoint Energy into Portfolio Manager, which helps when tenants pay their own bills.
The City’s data quality checks
The City’s compliance standards set out the checks it uses to accept a submission. Plan to meet them before you hit send:
- Gross floor area within 25% of the Tax Assessor’s figure, or an explanation.
- Site energy use intensity (EUI) between 25 and 400 kBtu per square foot.
- ENERGY STAR scores between 5 and 95. Extreme scores are reviewed for accuracy.
- Electricity, heating fuel and water values greater than zero, covering the full year.
- Correct Minneapolis Building ID, property ID and property type.
Parking structures are exempt from the EUI, heating and water checks. Data submitted after August 30 will not be published.

Energy evaluations for low-performing buildings
The City’s energy evaluation page says evaluations are required and free for buildings that score 75 or less on ENERGY STAR or that appear on the City’s list of low-performing buildings. Evaluations are good for five years.
Under the 2019 compliance standards, every five years a covered property must show proof of an ASHRAE Level 1 evaluation, or an accepted tune-up or recommissioning, completed within the past five years. Properties are exempt from the evaluation if they have:
- A high ENERGY STAR score (75 or above), or a low EUI if the property type cannot get a score.
- A qualifying green building certification within the past three years.
- A 20% or greater reduction in weather-normalized EUI over five years, measured from a 2020 baseline.
The requirement is only enforced when a no-cost option is available to the owner. The web page and the standards word the score cutoff differently, so owners scoring right at 75 should confirm their status with the City. For a sense of what a Level 1 review covers, see our guide to ASHRAE energy audit levels. A building that earns ENERGY STAR certification also has a strong case for the certification exemption.
Time-of-rent energy disclosure for apartment buildings
Minneapolis also requires landlords to share energy information with prospective renters “at or before the time of rental application,” according to the City’s renter energy disclosure page. What you provide depends on building size:
- Large buildings (over 50,000 sq ft): direct renters to the building’s public benchmarking information, including its ENERGY STAR score.
- Medium buildings (five or more units, under 50,000 sq ft): provide utility-generated reports from Xcel Energy and CenterPoint Energy showing average monthly energy costs over the last two years.
- Small buildings (one to four units): point renters in writing to the City’s rental energy cost dashboard.
Condominiums and townhomes are not included, and apartment buildings with a certificate of occupancy for less than two years are currently exempt. For large buildings, your public benchmarking results are what renters will see.
Fines for missing the deadline
The City’s deadlines and fines page explains the process. If you miss June 1, the City issues a $200 fine and gives you two weeks to submit the data or request an extension, and to pay the fine. If you still have not complied, the fine is issued again and the amount doubles each time, up to four times. Any unpaid fines are added to the building’s property taxes. The fastest way out is always to submit the data.
How Minneapolis fits with Minnesota’s statewide law
Minnesota’s large building benchmarking law, Minnesota Statutes section 216C.331, was enacted in 2023. It covers buildings of 50,000 sq ft or more served by certain utilities in the seven-county Twin Cities metro and in larger cities outside it. First reports were due June 1, 2025 for buildings of 100,000 sq ft or more and June 1, 2026 for buildings of 50,000 to 99,999 sq ft. Both groups now report every June 1, and the State’s public posting date for the smaller group’s first results is December 1, 2026.
Most Minneapolis owners do not need to file twice. The statute exempts properties covered by a local program the Commerce commissioner finds equivalent or more stringent, and the Minnesota Department of Commerce FAQ states that buildings benchmarking with the City of Minneapolis program are not required to also provide data to the State. Keep reporting to the City, and keep your Building ID handy.
Buildings elsewhere in the metro likely fall under the State program. Saint Paul ended its own city program at the end of 2024, according to the Department of Commerce.
Minneapolis benchmarking checklist
- Find each property on the City’s commercial or multifamily must comply list and note its Minneapolis Building ID.
- Set up or update the property in Portfolio Manager with correct floor area, use types and operating details.
- Connect Xcel Energy, CenterPoint Energy and water data early in 2027 so January to December 2026 is complete.
- Run Portfolio Manager’s checks and the City’s data quality ranges before responding to the City’s data request.
- Submit by June 1, 2027, or file an extension request with documents before the deadline.
- If your score is low, check whether you owe an energy evaluation or qualify for an exemption.
- For rental buildings, update your renter disclosure materials so applicants get current energy information.
Our energy benchmarking service handles the utility data requests, data checks and City submission for you. For the full program overview, see our Minneapolis energy benchmarking compliance page.
Frequently asked questions
When is Minneapolis energy benchmarking due?
June 1 every year, for the previous calendar year. The next deadline is June 1, 2027, for calendar-year 2026 energy and water data.
Which buildings must benchmark in Minneapolis?
Commercial and multifamily residential properties of 50,000 square feet or more that appear on the City’s must comply lists. Check the lists for your Minneapolis Building ID.
What is the fine for missing the Minneapolis benchmarking deadline?
The City issues a $200 fine and gives two weeks to submit data or request an extension. The fine doubles each time it is reissued, up to four times, and unpaid fines are added to the property taxes.
Do Minneapolis buildings also have to report to the State of Minnesota?
No, in most cases. The Minnesota Department of Commerce says buildings benchmarking with the City of Minneapolis program do not also have to provide data to the State large building benchmarking program.
What is a Minneapolis energy evaluation?
It is a review of a low-performing building’s energy use that identifies ways to save. The City says evaluations are required and free for buildings scoring 75 or less on ENERGY STAR or on its low-performing list, and they are good for five years.
Getting ready for June 1, 2027? Energy Fave sets up Portfolio Manager, collects Xcel Energy and CenterPoint Energy data, checks it against the City’s standards and submits your Minneapolis report. Request a quote and we will review your buildings and deadlines.
Sources: City of Minneapolis Energy Benchmarking program; City of Minneapolis benchmarking deadlines and fines; Minneapolis Health Department Compliance Standards for Energy Benchmarking (January 2019); City of Minneapolis renter energy disclosure; Minneapolis Code of Ordinances Section 47.190; Minnesota Statutes section 216C.331. Reflects guidance as of November 2026; confirm with the City before filing.

